Front Suspension for 2006 Toyota Sequoia

Front Hub

Front Axle, Left; Front Axle, Right. Fits 4Runner, Sequoia, Tacoma , TundraWheel Hub - Repair or ReplaceA wheel Hub may need to be replaced if the wheel bearing in your Toyota is being serviced, or if your ABS or Traction Control light is on. Tacoma. 4-runner. Tundra, Sequoia. 4wd. With auto disc-diff. 4 wheel drive, automatic hubs.

Hub Seals

4 wheel drive. 2 wheel drive. Tacoma. Auto trans. 4-runner. Floor shift. 2.7l, 3.4l. With prerunner. Inner. 4wd. 2wd.

Fits Sequoia, Tundra Steering Knuckle - Repair or Replace The steering knuckle in your Toyota may need to be replaced if it has become damaged or rusty, which will usually be determined during a related repair. 4wd. 2wd. Left. Tundra. Sequoia. 4 Wheel Drive, w/ abs.

Sequoia. 2wd. Mark 48510af070.

Mark 48510af160. 4wd.

Sequoia. 2wd. Right.

Right. 4wd.

Support

Front Suspension, Left; Front Suspension, Right. Fits Sequoia, TundraSuspension Shock or Strut Mount - Repair or ReplaceStrut mounts or strut bearings are often service with the strut assembly, and when they fail they can make a squeaking noise while turning or a metallic clunk noise when going over bumps. If your Toyota is noisier than usual on bumpy roads or under braking, you may need new strut mounts. 4wd. Tundra. Sequoia. 2 wheel drive.

Upper Control Arm

Fits Sequoia, TundraSuspension Control Arm - Repair or ReplaceControl arms often don?t fail on their own, although their associated bushings can break or wear causing a clunk noise when your Toyota goes over bumps or changes Speed rapidly?whether braking or under hard acceleRation. Control arms can also sometimes become bent, causing your vehicle to pull to the left or right. 4wd. Left. Tundra. Sequoia. 4 wheel drive.

Upper Ball Joints

Front Upper Ball, Left; Front Upper Ball, Right. Fits 4Runner, Sequoia, Tacoma , TundraSuspension Ball Joint - Repair or ReplaceA Ball joint that has failed can have many symptoms, whether it?s a squeak or creak that?s especially pr ...

Lower Control Arm

Fits Sequoia, TundraSuspension Control Arm - Repair or ReplaceControl arms often don?t fail on their own, although their associated bushings can break or wear causing a clunk noise when your Toyota goes over bumps or changes Speed rapidly?whether braking or under hard acceleRation. Control arms can also sometimes become bent, causing your vehicle to pull to the left or right. 4wd. Left. Tundra. Sequoia. 2 wheel drive.

Bushings

Front Lower ARM, No. 2 Left; Front Lower ARM, No. 2 Right. Fits Sequoia, Tundra Rear. 2wd, #2. 4wd, #2. Tundra. Sequoia. 4 wheel drive, #2.

Lower Ball Joint

Fits Sequoia, TundraSuspension Ball Joint - Repair or ReplaceA Ball joint that has failed can have many symptoms, whether it?s a squeak or creak that?s especially pronounced at slow Speeds or while turning, or possibly a clunk noise. Let our Toyota technicians inspect your Toyota for a failed Ball joint if you experience any of these symptoms. 4wd. Left. 4 wheel drive. Tundra, Sequoia.

2 wheel drive, without rear stabilizer. Tundra. 4wd. Sequoia. With air suspension.

Bushings

Fits Sequoia, TundraStabilizer Bushing - Repair or ReplaceA worn or broken stabilizer bushing or sway bar bushing may cause a rapid clank-clank noise when going over bumps. If your Toyota is exhibiting these symptoms, our Toyota techs can inspect and repair the problem for you. Sequoia. Tundra. 4wd. 2wd, with air suspension. 4 wheel drive, without off road pkg. 2 wheel drive, all, without rear stabilizer. 4 wheel drive, all, without rear stabilizer.

Bracket

Fits Sequoia, Tundra 4wd. Left. Tundra. Sequoia. 2 wheel drive.